2019-08-24

Augmented Logs for ARRL DX CW and SSB Contests, 2018

Links to the augmented logs may be followed here.

The augmented logs for the ARRL DX contests contain the same information as the cleaned logs, but with the addition of some useful (derived) information on each line. The information added to each line comprises:
  1. The sequence of four characters that are the same for each entry in a particular log:
    •  a. letter "A" or "U" indicating "assisted" or "unassisted"
    •  b. letter "Q", "L", "H" or "U", indicating respectively QRP, low power, high power or unknown power level
    •  c. letter "S", "M", "C" or "U", indicating respectively a single-operator, multi-operator, checklog or unknown operator category 
    •  d. character "1", "2", "+" or "U", indicating respectively that the number of transmitters is one, two, unlimited or unknown
  2. A four-digit number representing the time if the contact in minutes measured from the start of the contest. (I realise that this can be calculated from the other information on the line, but it saves subsequent processors of the file considerable time to have the number readily available in the file without having to calculate it each time.)
  3. Band
  4. A set of fourteen flags, each -- apart from column k and column n -- encoded as T/F: 
    • a. QSO is confirmed by a log from the second party 
    • b. QSO is a reverse bust (i.e., the second party appears to have bust the call of the first party) 
    • c. QSO is an ordinary bust (i.e., the first party appears to have bust the call of the second party) 
    • d. the call of the second party is unique 
    • e. QSO appears to be a NIL 
    • f. QSO is with a station that did not send in a log, but who did make 20 or more QSOs in the contest 
    • g. QSO appears to be a country mult (may be T for W/VE stations only)
    • h. QSO appears to be a state/province mult (may be T for DX stations only)
    • i. QSO is a zone bust (i.e., the received zone appears to be a bust)
    • j. QSO is a reverse zone bust (i.e. the second party appears to have bust the zone of the first party)
    • k. This entry has three possible values rather than just T/F:
      • T: QSO appears to be made during a run by the first party
      • F: QSO appears not to be made during a run by the first party
      • U: the run status is unknown because insufficient frequency information is available in the first party's log
    • l. QSO is a dupe
    • m. QSO is a dupe in the second party's log
    • n. RBN information (see below)
  5. If the QSO is a reverse bust, the call logged by the second party; otherwise, the placeholder "-"
  6. If the QSO is an ordinary bust, the correct call that should have been logged by the first party; otherwise, the placeholder "-"
  7. If the QSO is a reverse exchange bust, the exchange logged by the second party; otherwise, the placeholder "-"
  8.  If the QSO is an ordinary exchange bust, the correct exchange that should have been logged by the first party; otherwise, the placeholder "-"

RBN Information


In the CW contests from 2009 onwards, the RBN has been active, automatically spotting the frequency at which any station calling CQ was transmitting. To reflect possible use of RBN information, the augmented files include a fourteenth column. For the sake of uniformity, this column is present in all the augmented files, regardless of whether the RBN actually contributed useful information to a particular contest.

Each QSO has one of several characters in the fourteenth column of flags. These characters should be interpreted as follows:

'-'
  No useful RBN-derived information is available for this QSO.

'0'
  The worked station (i.e., the second call on the log line) appears to have begun to CQ on this frequency within (roughly) 60 seconds prior to the QSO.

'A' to 'Z'
  For the nth letter of the alphabet: the worked station appears to have been CQing on this frequency for (roughly) n minutes prior to the QSO.

'+'
  The worked station appears to have been CQing for more than 26 minutes on this frequency.

'<'
  Because the the RBN is distributed, and because each contest entrant station has its own clock, there is generally a skew between the reading of the clock of the station making the QSO and the timestamp from the RBN at which it believes a posting was made (indeed, it's unclear from the RBN's [lack of] documentation exactly how the timestamp on an individual RBN posting is to be interpreted). If the character '<' appears in the the RBN column, it indicates that the raw values of the clocks suggest that the QSO took place up to two minutes before the RBN reported the worked station commencing to CQ at this frequency. When this occurs, the most likely interpretation is that there is non-negligible skew between the two clocks, and the station was actually worked almost as soon as a CQ was posted by the RBN. But it might also mean that the entrant was simply lucky and found the CQing station just as it fired up on a new frequency.

Notes:
  • The encoding of some of the flags requires subjective decisions to be made as to whether the flag should be true or false; consequently, and because the ARRL has yet to understand the importance of making the scoring code public, the value of a flag for a specific QSO line in some circumstances might not match the value that the ARRL has assign. (Also, the ARRL has more, non-public, data available.)
  • I made no attempt to deduce or infer the run status of a QSO in the second party's log (if such exists), regardless of the status in the first party's log. This allows one cleanly to perform correct statistical analyses anent the number of QSOs made by running stations merely by excluding QSOs marked with a U in column k.
  • No attempt is made to detect the case in which both participants of a QSO bust the other station's call. This is a problematic situation because of the relatively high probability of a false positive unless both stations log the frequency as opposed to the band. (Also, on bands on which split-frequency QSOs are common, the absence of both transmit and receive frequency is a problem.) Because of the likelihood of false positives, it seems better, given the presumed rarity of double-bust QSOs, that no attempt be made to mark them.
  • The entries for the exchanges in the case of exchange or reverse exchange busts are normalised to two-digit values in the same manner as the exchanges in the cleaned.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.